不同火灾规模下隧道水幕线性喷水强度的研究

为了探究火源功率和水幕线性喷水强度对烟气特征参数和水幕阻烟隔热能力的影响，以全尺寸隧道为研究对象，采用FDS数值模拟方法，还原验证了前人使用的小尺寸模型，研究了20组工况下烟气特征参数变化的规律。研究结果表明:根据相似性原理还原后的全尺寸模型在相同工况下的模拟结果与小尺寸实验基本一致；水幕系统降低遮光率的效果随线性喷水强度增加而增强，当线性喷水强度增至一定程度时，遮光率和隔热效率无明显变化；对于中、大型规模火灾，水幕有效作用时间出现减少的情况；火源功率为5，20，30 MW的小、中、大规模的隧道火灾，综合考虑经济性和水幕效果，建议分别选择水幕的线性喷水强度为8，14，16 L/(s瘙
簚m)。     

污水处理移动床生物膜反应器悬浮载体研究进展

介绍了移动床生物膜反应器(MBBR)中悬浮载体的种类和特性,讨论了对其性能的影响因素,总结了当前悬浮载体改性技术及性能评价的方法,并对后续研究提出了建议。     

Aerobic treatment of swine manure to enhance anaerobic digestion and microalgal cultivation

Aerobic treatment of swine manure was coupled with anaerobic digestion and microalgal cultivation. A 14-day aerobic treatment reduced the total solid content of swine manure by >15%. Ammonia and carbon dioxide were stripped by the air supplied, and this off-gas was further used to aerate the culture of Chlorella vulgaris. The microalgal growth rates in Bristol medium and the wastewater with the off-gas increased from 0.08 to 0.22 g/L/d and from 0.15 to 0.24 g/L/d, respectively. Meanwhile, the aerobically treated swine manure showed a higher methane yield during anaerobic digestion. The experimental results were used to establish a demonstration unit consisting of a 100 L composter, a 200 L anaerobic digester, a 60 L tubular photobioreactor, and a 300 L micro-open raceway pond.     

江苏省水质全要素代表性监测体系的设计

为了评价并进行城市水环境质量考核排名,介绍了江苏省组织开展涵盖地表水、饮用水、地下水、近岸海域和城市内河5种类型"全要素、代表性"水质监测断面(点位)体系建设工作的情况以及全要素断面设置的基本原则和做法。分苏南、苏北、苏中3个区域,对全省地表水监测代表性进行了量化计算,结果表明,调整后全省水质综合指数极差从41.07降至7.17,标准差从3.16降为0.49;采用德尔斐层次分析法分析,设计了水质代表性指数,含1项一级指标、5项二级指标、12项三级指标,计算表明,调整前全省水质代表性指数得分为69.1分,调整后为88.7分。将调整结果进行论证后再与各市环保主管部门交换意见,取得最终一致后正式实施。     

基于平衡计分卡的大气环境监测数据共享网站绩效评估研究

基于平衡计分卡原理,结合网站特点,建立了大气环境监测数据共享网站绩效评估模型。以共享网站的战略愿景为模型框架的中心,以财务、顾客、内部程序、学习与成长等4个基本维度为一级指标,构建了绩效评估指标体系,并采用层次分析法确定了各指标的权重。利用该模型对长三角区域空气质量预测预报系统和宁波市空气质量预报预警平台的大气数据共享模块进行实证研究,绩效评估结果均为良好。     

阿什河底栖动物群落特征及影响因子

阿什河作为松花江的一级支流,全境包含了从Ⅰ类到劣Ⅴ类的各种类型水质。通过对阿什河沿线底栖动物群落构成进行调查,结合典范对应性分析(CCA)对底栖动物群落与环境因子进行相关性分析得出结论,溶解氧和高锰酸盐指数为研究区域内底栖动物群落构成的主要限制因子。为分析不同水质条件下底栖动物种群变化成因和从生物学角度提出阿什河治理方法提供技术依据。     

供水管网震后流量监测点的动态分级优化布局研究

为了提高管网地震监测点布局的准确性和合理性，基于管网微观水力计算模型和动态分级法，提出供水管网震后流量监测点的动态分级优化布局模型。首先，利用管网微观水力计算模型计算管段流量的影响系数，构建管段的影响系数矩阵，并利用信息熵确定管段权重；其次，标准化处理影响系数矩阵，通过聚类迭代提出供水管网地震流量监测点优化布局的动态分级方法，对供水管网震后流量监测点进行优化布置分级评定；最后，根据工程实例进行方法实践，结果表明:供水管网中的管线分类较为科学合理，地震监测点在供水管网上分布也比较均匀，而且该模型在一定程度上消除了人为因素的影响，保障了震时管网的监控效果和日常建设的合理性。     

Laboratory investigation of Waelz slag stabilization

Electric Arc Furnace dusts are considered hazardous waste due to their high heavy metals content (zinc, lead, etc.). The Waelz process is one of the most efficient technologies, in terms of capacity and quality, able to recover nearly the 90% of zinc contained in such EAF dusts. Unfortunately, the resulting slag still has eco-compatibility problems, although its mechanical and chemical properties are suitable for civil engineering applications. Stabilization tests, by quartz addition, were performed on EAF dusts in a laboratory furnace. Temperature, treatment time and cooling rate were varied in order to define the best conditions for regulating the formation of a stable microstructure able to hinder the release of substances. Microstructural characterization was carried-out using SEM and XRD analysis. Leaching tests were performed according to EN 12457-2 standards and water analyses were performed using ICP-OES. The best chemical stability was achieved when dust powders were mixed with 20% of silica and water-cooled.     

Optimal Absorbent Evaluation for the CO2 Separating Process by Absorption Loading,Desorption Efficiency,Cost, and Environmental Tolerance

The CO₂ absorption capacities of potassium glycinate, potassium sarcosinate (choline, proline), mono-ethanolamine (MEA), and tri-ethanolamine were evaluated to find the optimal absorbent for separating CO₂ from gaseous products by a CO₂ purification process. The absorption loading, desorption efficiency, cost, and environmental tolerance were assessed to select the optimal absorbent. MEA was found to be the optimum absorbent for separating the CO₂ and H₂ mixture in gaseous product. The maximum absorption loading rate was 0.77 mol CO₂ per mol MEA at temperature of 20°C and absorbent concentration of 2.5 mol/L, whereas desorption efficiency was 90% by heating for 3 h at 130°C. MEA was found to be an optimal absorbent for the purification process of CO₂ during gaseous production.     

我国腈纶废水物化预处理方法的研究进展

结合我国腈纶废水的特征,系统归纳了近年来我国腈纶废水常用物化预处理方法的研究进展。物化预处理方法包括内电解法、混凝法、Fenton氧化法、电解法、臭氧氧化法、光催化氧化法、微波法等。这些方法普遍存在高成本、高能耗、实际运行费用大等问题。对未来物化预处理方法的研究方向提出了建议。最后指出,腈纶废水的处理应朝着节能高效和资源化的方向发展,推动我国腈纶废水处理技术的不断进步和完善。